Dalian Youyan Plastic Machinery Co., Ltd.
Couplet: Feng Manager
Address: Chinese Lushunkou District of Dalian City, the three streams town (take Tuchengzi Dalian to Lushun Road westbound vehicle airport about 200 meters in front of about 100 meters)
Three layers of the correct way of using the co-extrusion blown film machine
Three-tier co-extrusion blown film machine Three-tier co-extrusion blow thin line adopts the new type of high efficiency low energy consumption extrusion unit, the IBC film cooling system inside the bubble, + 360 ° for traction on the horizontal rotating system, photoelectric automatic correction device, automatic winding and film tension control, advanced technology such as computer screen automatic control system. Compared with the similar equipment, has a higher yield, good product plasticizing and the advantages of low energy consumption, easy operation, completely solve the film falbala and winding size top problem, make the product quality on a new step. Produce thin film with high transparency, durability, high toughness, low temperature eager resistance, good composite fastness, and crimp resistant. This film because of its good barrier property, keeping fresh, well protected against dampness, frost proof, oxygen insulation, oil resistant, can be widely used for packing weight. Such as all kinds of fresh fruit, meat, pickles, fresh milk, liquid beverage, medical supplies, etc.
Correct method of use
1. Check the reduction space and air compressor cylinder lubricating oil.
2. Observe the adjustment of thin film thickness uniform, folding size up to the standard.
3. Check the air cylinder pressure storage, not too high, but shall have the standby pressure.
4. Check control raw material and mixing ratio.
5. Check the running motor temperature rise and mechanical transmission.
6. Check the temperature control in good condition, heating appliances in good condition, pay attention to timely adjust the heating temperature of each point in the range of indicators.
7. Check the raw materials have impurities, particularly immediately with the iron mixed with magnetic inspection.
8. Check the drawing speed, control the film thickness.